国产无套乱子伦精彩是白视频,香蕉久久人人爽人人爽人人片av,在线观看视频午夜国产,欧美自拍另类欧美综合图区,波多野结衣无码视频在线观看

BYD CPD120 Electric forklifts Sales phone

When adding water, it must not exceed the bottom of the distilled water bottle!!! 4

Regardless of the price of the forklift, this can ensure the normal use of the electric forklift on the one hand, and on the other hand ensure that the battery can be charged normally and quickly after work

The fill welding work starts from the drilled hole to the other end of the crack, and the weld is also welded on the reverse side

Check the lifting chain to see if there are any cracks or damage

Check before use: (1) Check whether the fuel, lubricating oil, hydraulic oil and coolant are sufficient

(20 Lower the fork to the lowest position so that there is no system pressure in the hydraulic system

How to improve Reduce the error rate: At present, many warehouse management still relies on manual work

The operator must be familiar with the condition of the vehicle before use, and must not allow unsupervised personnel to operate it at will; 3

2 8 Polyurethane, nylon, rubber and other casters are used to meet the requirements of various environments for handling tools

(4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same

BYD CPD120 Electric forklifts Sales phone (4) When a forklift approaches or removes objects, the vehicle speed should be slow and steady, and care should be taken not to crush objects, wooden mats, etc (7) Check whether the tools and accessories on board are safe Inspection items during work: usually within 2 hours of work (1) Check the working condition of the engine, chassis, working device, hydraulic system, instruments and signal devices (2) Check whether the temperatures of the wheel axle, brake drum, transmission, torque converter, gear pump and drive axle are normal

There is an emergency power-off button on the vehicle body, and there are lift buttons and forward/reverse buttons on the handle

Battery The battery is fixed in the battery box, with a voltage of 24V and a standard capacity of 210Ah

(2) When the direction switch is turned to the reverse position during normal operation, the electric brake function can be executed

7MPa) to drive the lifting hydraulic cylinder and the tilting hydraulic cylinder

3 Body Specifications The length, width, edge shape and size of the vehicle body should be consistent with the size of the goods and the width of the entrance

Cars and other eight series of products

3 Electric transport forklift manufacturers remind that when working in multiple shifts, motor-driven warehouse forklifts need to have backup batteries It is characterized by no beams, high body strength and can withstand heavy loads First check the fasteners of the electric pallet truck to see if the nuts are loose and whether the gaps between the parts are too large During operation, pull up the handle to release pressure and the fork will go down; pull down the handle to increase pressure and the fork will go up The electric hydraulic truck lifts the cargo a few centimeters and confirms whether the cargo is secure

The above is the advantages and disadvantages of the two types of transport trucks manufactured by electric forklift manufacturers

BYD CPD120 Electric forklifts Sales phone Improve operating efficiency Fast charging mode: 1-3 hours fast charging mode is suitable for multi-shift work

Power socket assembly When charging the battery, unplug the socket with the handle and plug it into the plug on the charger

At the same time, because electrical components are often contaminated with water vapor, short circuits, leakage and other accidents are prone to occur

Unmanned forklifts, also known as AGV handling robots, do not require manual driving, have high positioning accuracy, and effectively reduce labor intensity

When using a reach truck, special attention should be paid to timely charging and proper maintenance of the battery If you want to buy a cost-effective electric transporter with low price, good quality and good service, you should first refer to the production strength of the manufacturer lead-acid), so no parameters need to be changed to manage the battery

The temperature of the buffer zone should be kept at around 0°C and the humidity should be kept below 40%

There is a tortoise and rabbit adjuster on the handle, and the tortoise speed and rabbit speed can be switched freely

Space-constrained applications can also benefit thanks to the flexibility of the folding platform

They are suitable for heavy load and long-term cargo transfer conditions, which can greatly improve cargo handling efficiency and reduce labor intensity

6 operating speed Automatically guiding the maximum speed that an electric truck can achieve when driving under a rated load is an important parameter that determines the vehicle's operating cycle and transportation efficiency

The emergence of forklifts is a sign of maturity in the industrial field, breaking away from the shackles of traditional manpower supremacy

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info