91自国产精品中文字幕,国产精品黄色片在线观看,欧美午夜性视频,中国亚州女人69内射少妇,一本一道波多野结衣av一区

BYD electric forklift series-

After installation, check whether the screws and elastic pins are installed in place and whether the wheel installation position is correct and not loose

com 3

(20 Lower the fork to the lowest position so that there is no system pressure in the hydraulic system

They are equipped with a variety of protection devices such as emergency contact safety devices, automatic alarm devices, emergency stop button devices and object detectors, which can avoid injuries to workers and damage to warehouses, other equipment and buildings, and reduce work risks

Therefore, it is necessary to regularly check and readjust the air gap, and pay attention to disconnecting the power supply of the equipment

When welding, the electrode should be inclined 20°-30° in the direction of movement

When heating, the heating area should be minimized, the heating temperature should be lower than 700℃, and it should be cooled slowly to avoid increasing brittleness

, Ltd

After forking the goods, it is lifted a short distance and then the mast returns to its original position along the track inside the leg

At the same time, more and more companies began to enter the field of electric forklifts, and made continuous breakthroughs and diversified innovations around the core technologies and products of electric forklifts, which promoted the further improvement of the level of domestic electric forklifts

This is just pallet handling (plane movement)

There may be no problems with various key functions and the electric truck can complete the work, but if these problems are not paid attention to, more problems will arise, and serious problems may cause the vehicle to be directly paralyzed, directly affecting the service life of the truck

Once the battery has problems, the all-electric transporter will not work properly

BYD electric forklift series-

Electric forklift: 0

They are light, make a little noise, and have average wear resistance

Electric forklift manufacturers recommend that companies choose electric forklifts with the same load capacity that have a smaller tire outer diameter

Tilt the joystick to tilt the mast so that it is in a vertical position

Before moving the forklift, you must check whether the brakes and batteries are fully charged

Forklifts are very popular in the warehousing industry

To ensure that the brake has sufficient braking torque, the air gap must be readjusted before the air gap reaches the maximum air gap value

The mast or fork frame of a reach-forward electric forklift can move forward and backward

However, the development of lithium batteries still has many technical shortcomings

Conclusion The narrow-aisle side stacking unmanned forklift designed in this paper eliminates the series of posture adjustment actions of the pallet stacker when turning 90° in the aisle in terms of cargo storage and retrieval action flow, making the storage and retrieval of goods more efficient; in terms of flexibility, it also has the characteristics of single-machine service for multiple storage channels, simple deployment, and flexible pickup location Today, the forklift editor will explain it to you

When using lifting equipment to lift a counterbalanced electric forklift, ensure that the lifting equipment is loaded with the required capacity

Pallet is a very important cargo-carrying tool used with electric transport trucks

BYD electric forklift series-

7Work cycle time Automatically guide the electric truck to complete the work cycle time required

If companies want to know more about all-electric transport trucks, they can contact electric forklift manufacturers

SZ), etc

Improve operating efficiency Fast charging mode: 1-3 hours fast charging mode is suitable for multi-shift work

are all protected to reduce the occurrence of faults

The steering operation is the same as the way we drive a car, and the forklift bearing and forklift fork can be controlled by the joystick

When the cargo width, length, and height exceed the limit, an alarm signal will be issued; ② The loading platform is designed with sensors to determine whether there is a pallet and whether it is empty or full; ③ In the hydraulic system, a pressure detection sensor is designed It is not very cost-effective The double-sided pallet is made of co-polypropylene, which cannot be formed in one go and must rely on later welding

Regardless of the price of the forklift, if the electric forklift has been working in a low temperature environment for a long time, it should be placed in a warm indoor environment for a period of time before charging it indoors

What kind of faults usually occur when electric forklifts are in use? Electric forklifts, I believe everyone is familiar with them, right? Generally speaking, mechanical equipment will inevitably fail after long-term use, and electric forklifts are no exception

Therefore, when purchasing a forklift, we must pay attention to the degree of damage to the forklift's casing, steering wheel, seat and other parts

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info