精品久久久久无码,在线色综合,国产一区二区不卡老阿姨,国产在线播放无码不卡,亚州精品无码人妻久久

BYD Forklift Specifications-

Both have their own characteristics

If the road conditions are good, the vehicle will continue to accelerate The lifting, lowering and turning of the forklift are driven by the hydraulic system

3 Body Specifications The length, width, edge shape and size of the vehicle body should be consistent with the size of the goods and the width of the entrance

Therefore, correct maintenance has become more important, and companies and drivers need to pay more attention

The new generation of electric forklifts will have better maintainability and operability, and the display and fault diagnosis systems will be more complete

(4) The control arm moves downward from the uppermost position and should be between the uppermost and lowermost positions

The following is a brief sharing by BYD Forklift: Carry out seasonal maintenance of equipment, test the antifreeze freezing point, and make it 5℃ lower than the local minimum temperature; the thermostat opening temperature is about 82℃; the battery electrolyte density reaches 1

Stay away from forklift operation areas (including the rack centralized placement area), specifically: (1) Do not take shortcuts and go directly through the forklift operation area; (2) Do not take a rest in the gap between the racks because you are tired; (3) When working with suppliers to confirm and inspect parts, do not use the forklift operation area for convenience

The new version of the regulations requires the installation of safety monitoring devices

5-2 tons, including stacker, transporter, stacker, three-way stacker, and high-bay stacker

(4) The control arm moves downward from the uppermost position and should be between the uppermost and lowermost positions

Zhuoyi Forklift is such a company that takes "industry customization" as its strategic direction

BYD Forklift Specifications-

They are widely used in the warehousing industry because of their compact body, flexible movement, light weight and good environmental performance

Compared with internal combustion forklifts, they have the advantages of no pollution, easy operation, energy saving and high efficiency

The high-pressure oil first flows into the synchronous motor from the oil inlet channel through the oil pump, and then the hydraulic oil is forced to be divided into 4 paths through the meshing gears in the synchronous motor, supplying oil to each cylinder with equal flow, realizing the synchronization of the hydraulic system

Large-tonnage electric pallet trucks have the advantages of energy saving, no exhaust emissions, and environmental protection

Even if the fork of the electric transport truck can pass through the socket of the double-sided pallet, it cannot lift

As early as 2015, the "Guiding Opinions on Accelerating the Development of Life Service Industry and Promoting the Upgrading of Consumption Structure" issued by the State Council clearly pointed out: Actively develop new logistics service models such as cold chain logistics and integrated warehousing and distribution

Drive device with brake It is equipped with an electromagnetic powered brake, a travel motor, a gear box and a driving wheel, and a steering bearing is arranged between the driving motor and the gear box

As a product that has only been widely popularized in recent years, many companies may not know much about it

If there is no damage, but it just needs maintenance, we can do it ourselves

Fault 1: Jitter occurs when the motor is greatly increased When the electric transport truck is lifted significantly, there is gas inside the cylinder, causing shaking during lifting; the gas can be discharged by lifting the load multiple times; oil leakage in the hydraulic system can also cause shaking during lifting, so timely inspection and replacement of oil seals and hydraulic cylinder devices is required 3 How to operate a BYD forklift? Operating a BYD forklift is a technical job that requires certain knowledge and skills Due to its zero pollution and low noise, it is widely used in indoor operations and other industries with high environmental requirements

BYD Forklift Specifications-

As an electronic component for real-time monitoring, automatic balancing, and intelligent charging and discharging, the battery management system plays an important role in ensuring safety, extending life, and estimating remaining power

When driving with loads, if the forks are raised too high, the overall center of gravity of the forklift will increase, affecting the stability of the forklift The structure of electric forklifts: The body is the main structure of the forklift, which is generally made of steel plates of more than 5mm

Compared with imported electric trucks, domestic electric trucks generally do not have a power steering system installed

The coping methods mainly include shot peening of metal structural parts, paint film strengthening treatment, and rust prevention of bolts, nuts and machine pins

It is strictly forbidden to stand above or below the forks, and it is not allowed to use a single fork to pick up goods that are too high to be loaded The temperature of the buffer zone should be kept at around 0°C and the humidity should be kept below 40%

The safety distance is generally 200mm

In response to this, some companies should design vehicles according to the specifications of lithium batteries, making the vehicle more compact and more convenient to operate It is very popular now because of its easy operation, time-saving and labor-saving

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info