激情综合色五月丁香六月亚洲,亚洲AV无码精品一二三区推荐,我的公把我弄高潮了视频,午夜精品一区二区三区在线视,国产99页

Is BYD electric reach forklift a special equipment?-

The load should be in a low position when the electric forklift is moving, and the height of the fork from the ground should not exceed 300mm

Especially when operating in aquatic product cold storage, it will also be corroded by salt

The gantry is hinged on the front axle support body and consists of a set of parallel steel frames and a sliding bracket for fixing the fork

Under the general trend of green environmental protection and intelligent manufacturing, more and more new energy forklifts have become the first choice

During the unloading process, rapid descent and unloading are strictly prohibited; 12 7 Prevent vehicles from carrying people; 7

They are efficient and safe

Clean the mud and other attachments on the outer shell regularly to avoid interfering with heat dissipation

Moreover, it is also easy to maintain, and even if it encounters a malfunction and needs to be repaired, it can be easily solved

Fault 1: Jitter occurs when the motor is greatly increased When the electric transport truck is lifted significantly, there is gas inside the cylinder, causing shaking during lifting; the gas can be discharged by lifting the load multiple times; oil leakage in the hydraulic system can also cause shaking during lifting, so timely inspection and replacement of oil seals and hydraulic cylinder devices is required

Figure 4 shows the pictures of the 3D virtual prototype and the test prototype

Is BYD electric reach forklift a special equipment?-

It is forbidden to park the counterbalanced forklift in the moving area, and it is strictly forbidden to stand on the forks or pallets of the counterbalanced electric forklift

The DC motor and hydraulic motor drive the lifting of the fork, pushing the cylinder up and down to lift the fork and goods

The telescopic fork is designed with a mid-position detection sensor and a travel limit sensor The turning radius of a three-wheel forklift is much smaller

Mechanical structure To achieve synchronous lifting of hydraulic cylinders, mechanical synchronization is often the simplest and lowest-cost solution

The electric walk-behind warehouse truck is the third type of forklift (III) in the classification of the World Industrial Truck Statistics Association

Due to the mature market development, manual trucks are economical, comfortable, and labor-saving

Once a dimension tolerance occurs, the unmanned forklift stops and the system alarms

If the water level is lower than the standard level, distilled water should be added appropriately

In addition, the heat of AC motors mainly occurs in the stator coils of the motor housing, which is convenient for cooling and heat dissipation

During operation, the amount and weight of the operation must be controlled according to the correct operating specifications and operating sequence

Compared with traditional forklifts, electric forklifts are quiet, pollution-free, have low operating costs, long service life, and require less maintenance

It is strictly prohibited to park in the aisle or in places with uneven slopes

Is BYD electric reach forklift a special equipment?-

The larger the load, the more expensive it is

Pay attention to safety when charging (check whether the wires and charging sockets are damaged, and use them only when they are intact, and leave only when everything is correct)

Forklift bearing broken The forklift bearing is a very important hardware component on the forklift

The electrical parts and connectors must be arranged inside, and protective covers can also be added

Electric forklift is a very common type of logistics and warehousing equipment

5 The difference is that all operations of a fully electric pallet truck are controlled electronically, without the need for manual operation When an electric truck is used with a pallet, the pallet should be selected based on the load range and configuration of the electric truck and the material and specifications of the pallet It has become an important part of the modern logistics system, the main force in material handling equipment, and the equipment for mechanized loading and unloading, stacking and short-distance transportation

When driving on a larger slope allowed, the operator must keep the cargo on the counterbalanced electric forklift and slow down at the same time, and never accelerate

Warehouse forklift is a practical tool commonly used in warehouses Use explosion-proof electric transport trucks to transport goods, which runs smoothly and reduces damage to the transported items The fourth step is to drive the electric forklift slowly forward and allow the forks to fully insert under the cargo

Stay away from forklift operation areas (including the rack centralized placement area), specifically: (1) Do not take shortcuts and go directly through the forklift operation area; (2) Do not take a rest in the gap between the racks because you are tired; (3) When working with suppliers to confirm and inspect parts, do not use the forklift operation area for convenience

(5) When using a fork to pick up goods, the fork should be inserted as deep as possible under the load, and care should be taken that the fork tip does not touch other goods or objects

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info